|
|
|
 |
| |
With the introduction of transistor controlled power sources
for arc welding, OTC DAIHEN Corporation became the leader in technology
as far back as in 1986.
In 1989, OTC DAIHEN Corporation introduced
the full inverter technique for arc welding machines into Europe as
one of the first system designers. Since then an extensive range of
inverter welding machines are available for MIG/MAG, MIG/MAG
pulse, MMA-DC TIG, AC-DC TIG, TIG pulse as well as transistor air
plasma cutting machines.
The development of disturbance-insensitive
microprocessors enabled OTC DAIHEN Corporation to produce digitised
impulse welding power sources since 1997. Using this technology and
integrated Fuzzy Logic, OTC DAIHEN Corporation took quality welding
a giant step forward.
The efforts to overcome the disadvantages that
occur with the CO2 shielding gas widely used in Japan led to improved
machine technology. This improvement in combination with the mixed
gases AR/CO2 generally used in Europe shows outstanding welding results.
|
|
| |
|
|
CPTX
270 / 400
|
|
|
|
*
MIG/MAG compact power source
* Integrated wire feeder
* Compact
* Integrated timer function / Interval-weld |
|
| |
|
|
|
| |
| |
CPXS
350 / 500
|
|
| |
MIG/MAG
thyristor power control *
Stable arc start *
Remote control *
Integrated crater filling function *
Machine interface *
|
|
 |
|
|
|
| |
|
CPV
350 / 500
|
|
|
|
* MIG/MAG inverter power
source
* Stable arc start by inverter technique
* High welding speed with minimised spatter
* Welding parameter adjustment via microprocessor "One-Knob
Control"
* Diagnostic system
* Remote control
* Integrated crater filling function
* Machine interface |
|
| |
|
|
|
| |
| |
CPDP
350 / 500
|
|
| |
MIG/MAG
digital pulse power source *
Fuzzy logic regulated penetration check *
14 / 13 preset welding programs *
Strong noise reduction by optimised waveform *
|
|
|
|
|
|
| |
|
DT300
/ DS 300 |
|
|
|
* Precise arc characteristics and stability by inverter technology
* Crater fill fuction
* Pulsed TIG welding fuction available (option)
* Three pahase or single phase input
* HF and LIFT start for TIG welding
* Overheat and abnormal input voltage protection
* Durable moulded case
* Weight 38kg |
|
| |
|
|
|
|
AVP
300
|
|
|
|
TIG Double Inverter
Power Source *
TIG-AC, TIG-DC, Electrode-Welding *
AC/DC Hybrid-Welding for Aluminium *
Balance regulation within the AC area *
Arc Spot Timer
*
|
|
|
|
|
| |
|
A
70
|
|
|
|
* Precision
high speed plasma cutter
* Precise cuts in steel, aluminium and copper
* Material thickness of up to 25 mm
* Large work area through hose packages of up to 10 m length
* Continuous cutting current adjustment
* Diagnostic system
* S-character by integrated protection circuit
|
|
| |
|
|
|
| |
|
D
12000
|
|
|
|
Precision
high speed plasma cutter *
Precise cuts
in steel, aluminium and copper *
Material thickness of up to 60 mm *
Large work area through hose packages of up to 30 m length *
Continuous cutting current adjustment *
Diagnostic system *
Part wearing monitoring *
S-character by integrated protection circuit
*
|
|
|
|
|
|
|
| |
|
|
| |
|
|
| |
 |
|
|
| |
10 Avonlea Rise, Leamington Spa, Warwickshire,
England CV32 6HT
Tel: 44(0)1926 887319 Fax: 44(0)1926 887319 Mobile:
0410 244568
gh-otcuk@lineone.net
|
|
| |
|
| |
|
| |
|
| |
|
| |
|
 |
|
